Hmmm, MPM.exe crashes!
I looked at my folder if i had NET 4.5 and it told me 4.0.3
I downloaded 4.5 and when i tried to install a notice came: system (win 10) already has 4.5 or higher...
When i run MPM.exe it crashes...


Toystorylab on Vimeo : 75% of original size (was 671x19) - Click to enlarge    Crassitudes (my "Alter Ego") on Youtube: 75% of original size (was 671x19) - Click to enlarge

You can check which .NET versions are installed following the steps described here: https://msdn.microsoft.com/en-us/library/hh925568(v=vs.110).aspx

In my system I have the 4.0.0, some earlier versions, and then the 4.6.
Anyway, I compiled the SW targeting the 4.5.
You can eventually install the 4.6 (https://www.microsoft.com/en-us/download/details.aspx?id=48130), which will stay on top of the 4.5.
But first, check what is installed, because it sounds like the .NET 4.5 might be not installed properly.
..and do create a System Restore before installing the .NET 4.6 ;-)

Cheers

  Roberto





My PC:
OS: Windows 10 Pro English 64-bit / CPU: Intel i7-9700 3.6GHz / MB: ASUS ROG Strix Z390  RAM: 32GB DDR4 2.6GHz / HD: 2TB+3TB  /  SSD: 2x512GB Samsung 860 EVO + 1x2TB Samsung
VB: Palit GTX2080 TI GamingPro 11GB / AB: embedded in the MB and VB (audio from the MOTU M4 I/F) / DirectX: 12

Thanx for quick reply!
Seems i have 4.6...
75% of original size (was 671x19) - Click to enlarge75% of original size (was 671x19) - Click to enlarge75% of original size (was 671x19) - Click to enlarge


Toystorylab on Vimeo : 75% of original size (was 671x19) - Click to enlarge    Crassitudes (my "Alter Ego") on Youtube: 75% of original size (was 671x19) - Click to enlarge

Different Language Pack? (Germany) Could that be a reason??


Toystorylab on Vimeo : 75% of original size (was 671x19) - Click to enlarge    Crassitudes (my "Alter Ego") on Youtube: 75% of original size (was 671x19) - Click to enlarge

The language should not create any difference...
I have installed  a slightly previous version (4.6.01038).
Anyway, I am going to rebuild the .exe file targeting .NET 4.6 and adding a 2nd download link, so that you can try it again.
Gimme some minutes and i will be back...

My PC:
OS: Windows 10 Pro English 64-bit / CPU: Intel i7-9700 3.6GHz / MB: ASUS ROG Strix Z390  RAM: 32GB DDR4 2.6GHz / HD: 2TB+3TB  /  SSD: 2x512GB Samsung 860 EVO + 1x2TB Samsung
VB: Palit GTX2080 TI GamingPro 11GB / AB: embedded in the MB and VB (audio from the MOTU M4 I/F) / DirectX: 12

COOOLLOOMATO :w00t:


Toystorylab on Vimeo : 75% of original size (was 671x19) - Click to enlarge    Crassitudes (my "Alter Ego") on Youtube: 75% of original size (was 671x19) - Click to enlarge

OK, I added also a link to download a version compiled with .NET 4.6
Just copy this new .exe file in the same directory and launch it.
Let me know if it works

Cheers

  Roberto



My PC:
OS: Windows 10 Pro English 64-bit / CPU: Intel i7-9700 3.6GHz / MB: ASUS ROG Strix Z390  RAM: 32GB DDR4 2.6GHz / HD: 2TB+3TB  /  SSD: 2x512GB Samsung 860 EVO + 1x2TB Samsung
VB: Palit GTX2080 TI GamingPro 11GB / AB: embedded in the MB and VB (audio from the MOTU M4 I/F) / DirectX: 12

Thank you very much for this Roberto, I set it up and added a bunch of motion groups but have problems with Cartoon Motion V2 or V3 not showing up, they're all blank in iClone, also the Mr Pose and Friends motions don't show up either, just blank spaces.  I couldn't find in the manual how to correct this but I might have missed something.


Dell XPS 8900, Intel(R) Core(TM) i7-6700 CPU @ 3.40GHz, 3408 Mhz, 4 Core(s), 8 Logical Processor(s), 16 GB RAM, - 4 GB GeForce GTX 745, NVIDIA compatible.
Acer Aspire V Nitro Laptop,  2.5GHz Intel Core i5-7300HQ processor with 6MB cache,  256GB solid state drive, 16GB Ram,  4 GB NVIDIA GeForce GTX 1050 Ti graphics.

Sorry Roberto,
but the MPM_NET4.6.exe CRASHES also :crying:


Toystorylab on Vimeo : 75% of original size (was 671x19) - Click to enlarge    Crassitudes (my "Alter Ego") on Youtube: 75% of original size (was 671x19) - Click to enlarge

Hi,

a couple of notes:

1. there MUST always be the original directory (created during iClone installation) named "Base Motion".
    If it is not there, the Motion Puppet tool does not show anything at all.
    MPM does not show it, in order to avoid to touch it.
   Make sure you haven't deleted by mistake.

2. which iClone version do you use ?
    If it is iClone 6, the Body Profile directories shall be always called "Base " and then Body Profile name (e.g. "Base MyMoves").
    Just check directly in the file system which directory you have.
    
Let me know
Cheers

  Roberto



My PC:
OS: Windows 10 Pro English 64-bit / CPU: Intel i7-9700 3.6GHz / MB: ASUS ROG Strix Z390  RAM: 32GB DDR4 2.6GHz / HD: 2TB+3TB  /  SSD: 2x512GB Samsung 860 EVO + 1x2TB Samsung
VB: Palit GTX2080 TI GamingPro 11GB / AB: embedded in the MB and VB (audio from the MOTU M4 I/F) / DirectX: 12