Hi all,

I have CrazyTalk 8. This weekend was the first time I've tried using it. I wanted to do a 2D actor talking head synced to a 4 minute song. I created a 2D actor from a picture. Then, I followed the lip syncing tutorial and ended up with the song as the background music and my voice-over controlling the lip syncs. I was disappointed with the performance. I could not properly modify the lip syncs because each time I hit play there was a delay with the actual animation preview. Basically, I hear the audio going, but the screen is frozen and delayed for a few seconds. It made figuring out where the vocals aligned with the actual frame difficult.

I'm not sure if there are any tips to optimize the performance, but I wanted to get a check whether my system specs are sufficient to be able to do a real time preview without any delays.

I currently have the following:

The performance depends on the GPU and the data size of the project

-------------------------------------------------------------------
liebe Grüße vidi

meet us here

These are the Recommended System Requirements for iClone that I have which should be good to go by for all Reallusion Programs.

            NVIDIA                                          AMD

GeForce GTX 600 Series     OK     Radeon HD 8000 Series     OK
GeForce GTX 700 Series     OK     Radeon R5 M200 Series     OK
GeForce GTX 800 Series     OK     Radeon R7 M200 Series     OK
GeForce GTX 900 Series     OK     Radeon R9 M200 Series      ?

Recommended System Requirements:
(iClone will have better performance in below recommended environment)

  *  Intel i5 dual core CPU or higher - or AMD equivalent.
  *  8GB RAM or higher recommended.
  *  10GB free hard disk space or higher recommended.
  *  Display Resolution: 1920 x 1080 or higher.
  *  Graphics Card: NVidia Geforce GTX 600 Series/ AMD Radeon HD 7000 Series or higher.
  *  Video Memory: 2GB RAM or higher recommended.
  *  Video card compatible with Pixel Shader 3.0 recommended for optimized visual performance.

So if your system falls into this category then also make sure all your drivers are up to date, if they are then submit a support ticket would be my recommendation. 
I also reinstall the latest updates if I'm having multiple program issues, not sure if it does anything at all but it's just something I do.


Dell XPS 8900, Intel(R) Core(TM) i7-6700 CPU @ 3.40GHz, 3408 Mhz, 4 Core(s), 8 Logical Processor(s), 16 GB RAM, - 4 GB GeForce GTX 745, NVIDIA compatible.
Acer Aspire V Nitro Laptop,  2.5GHz Intel Core i5-7300HQ processor with 6MB cache,  256GB solid state drive, 16GB Ram,  4 GB NVIDIA GeForce GTX 1050 Ti graphics.

Your system specs are fine the problem you have is the lack of video memory" in short your video card is to weak to handle iclone. Any video card with only 2gigs of memory is not enough to run 85% of today's 3d software including games.the reality an 8 gig  video card should be the absolute min required spec for any 3d software program. Unfortunately  the only option you have is to upgrade your video card. I am not trying to be mean or anything just truthful.:)

Cheers


Freelance Artist Kevin.S



  

Email: animatemyart@gmail.com - Web Site:  www.animatemyart.com

The OP is talking about CrazyTalk 8, which should have much less stringent requirements than iClone 6.

Minimum requirements (from the CT 8 FAQ page here):

Windows
64-bit Operating System: Windows 10/Windows 8/Windows 7 SP1 
CPU: Dual core CPU or higher 
Memory: 2 GB RAM or higher 
Video Card: Nvidia GeForce 8 Series or higher/ATI HD 3000 Series or higher 
Video Memory: 512MB RAM or higher  
Display Resolution: 1024 x 768 or higher
Hard Disk Space: 5 GB free hard disk space or higher

In the CT7 FAQ it said something about Hyper-V, which should be disabled when installing. This may also apply to CT8.

This is known issue for Windows 8 in which the Hyper-V windows feature is turned on.  You may have Hyper-V as part of the Windows Phone SDK or Windows 8 Pro version is turned on Hyper-V by default. 

Other than a possible Hyper-V issue, your system should be powerful enough.

---

but what is with the Project size ?
Szene + 4 min Background Music in HQ can be too much
Better would be to make only the Lipsync
and  use a NLE for bring all thogether



-------------------------------------------------------------------
liebe Grüße vidi

meet us here

Windows 10   Evga and MSI both read on my system 1.5 gigs of memory usage just to open crazytalk 8. Add 1 picture and it jumps to 1.758 gigs of memory usage that's with absolutely no edits voices background etc. That's almost all your video memory used just to open crazytalk and add a picture. That leaves you with vary little video memory once you cap that 200ish free Megs your software will studder and chop badly. You can download MSI afterburner and monitor your video memory usage and see for yourself. MSI Afterburner https://gaming.msi.com/features/afterburner.

If you want to know if it is hardware related or software just run MSI afterburner, if you are not using all your video memory and crazytalk8 is chopping and studdering then its a software issue of some kind drivers system etc, if you are at full memory usage then its hardware. Lack of memory.

my 2 cents cheers


Freelance Artist Kevin.S



  

Email: animatemyart@gmail.com - Web Site:  www.animatemyart.com

Thank you all for the replies! First I will try animagic's suggestion of disabling Hyper-V and re-install the software. If that doesn't work, then I'll start shopping for a video card. I had my eye on a Quadro K2200, but it appears that this may not be the ideal solution as I also use Sony Vegas Pro 13.

It turns out that I have Windows 10 Home, so by default I do not have Hyper-V installed. I decided to try MSI Afterburner. When I played my saved CrazyTalk project, the card memory showed 1125 MB. However, this seems to be the capped and it did not go further beyond this value.If my video card has 2 GB of memory, then what would an additional memory get me if the usage only maxes out at less than the card memory?

Uploading a zoomed in version of the Afterburner screenshot.