Can someone please help ? I purchased some mirror props for use in Iclone 5 and they work just fine there. However, I cannot get these same props to work in Iclone 6 - I am frustrated that I cannot solve this problem ! Is there anyone out there who knows of a solution - If so could you please throw some light and give some step by step instructions as to how to get mirrors to work in general ?
Thank you
Bill V

I love iClone 6, but... no mirrors.

There is some sort of problem stopping the iClone 5 mirror prop from working in 6.  I don't recall anyone solving that yet.

Reflections always have been, and continue to be an issue in iClone.

Water works great, but other reflections don't.  I documented it here:  https://www.youtube.com/watch?v=0rvJ_PGhZVw

---

iClone 7... Character Creator... Substance Designer/Painter... Blender... Audacity...
Desktop (homebuilt) - Windows 10, Ryzen 9 3900x CPU, GTX 1080 GPU (8GB), 32GB RAM, Asus X570 Pro motherboard, 2TB SSD, terabytes of disk space, dual  monitors.
Laptop - Windows 10, MSI GS63VR STEALTH-252, 16GB RAM, GTX 1060 (6GB), 256GB SSD and 1TB HDD

Thank you very much for your reply regarding reflection problems and mirrors.
It seems odd that Iclone 6 should be released which at the very least should support all the features of Iclone 5 first before adding new features.
Do you think the developers of Iclone 6 are aware of this problem and if so do they intend to fix it sooner than later ? I must say the new interface is good but remain skeptical of backward compatibility
Again thanks for your reply :)

I think the "mirror prop" in iC5 was a kludge* put together by a user or a content developer (not the iClone development team, but a user who makes stuff to sell).  It was more of a hack.

Not to make excuses, but reflections are much more difficult than one would think.  But not impossible.  There are solutions, and the beautiful reflections in water prove it's possible.

So I keep pushing for Reallusion to work on that (without shouting or flinging insults).  I'm hoping they'll address that when the added support for a PBR shader.

Sadly, this leaves you without a good solution.  Some people make a video from the mirror's perspective, render it, and then put that video on the "mirror" surface.  I did that once when I guy looked into a TV camera and saw himself on a monitor.  It's extra work, but if you need it badly enough at least you can make your project.

---

iClone 7... Character Creator... Substance Designer/Painter... Blender... Audacity...
Desktop (homebuilt) - Windows 10, Ryzen 9 3900x CPU, GTX 1080 GPU (8GB), 32GB RAM, Asus X570 Pro motherboard, 2TB SSD, terabytes of disk space, dual  monitors.
Laptop - Windows 10, MSI GS63VR STEALTH-252, 16GB RAM, GTX 1060 (6GB), 256GB SSD and 1TB HDD

OK, idiot question: What is the iClone 5 mirror prop? Did it come with iClone 5, or do you download it somewhere?

Thanks,

Bill Carey

Idiot answer:  I don't know.

I've seen people talk about it.  I never had it or use it.  I'm not sure exactly where you get it.

---

iClone 7... Character Creator... Substance Designer/Painter... Blender... Audacity...
Desktop (homebuilt) - Windows 10, Ryzen 9 3900x CPU, GTX 1080 GPU (8GB), 32GB RAM, Asus X570 Pro motherboard, 2TB SSD, terabytes of disk space, dual  monitors.
Laptop - Windows 10, MSI GS63VR STEALTH-252, 16GB RAM, GTX 1060 (6GB), 256GB SSD and 1TB HDD

The mirror prop was unofficial. It was in IC5 beta, but never released. However, someone mentioned it, and we kept asking, and then Peter (RL) gave the download link.

The lack of a mirror in iClone 6 is troublesome, because I need it for my story...:angry:

---

This is how I do my whacky mirrors in iClone....:D





Click here to go to my YouTube Channel filled with iClone Tutes and Silly Stuff

Visit ANIMATED PROJECTIONS Powered by iCLONE

Intel Core i7 3960X @ 3300MHz Overclocked to 4999.7 MHz Sandy Bridge 24.0GB DDR3 @ 833MHz Graphic Display HP ZR30w 
GeForce GTX 980Ti 6GB  Microsoft Windows 7 Professional 64-bit SP1 ASUSTeK COMPUTER INC. P9X79 WS (LGA2011)

Nice! Unrelated question - how'd you get all your toolbars docked on the same side? I've got some on the right, and some on the left.

----

Typically it's just a matter of grabbing the "Green Bar" and un-docking it from it's current location and dragging to where you want it. It took me a bit of trial and error to figure out what was going on but after a few times got what I wanted. If you watch closely you'll see a faint blue panel appear at the top or the side at that point you can dock windows...once again trial and error will get you there...:D:D:D


Click here to go to my YouTube Channel filled with iClone Tutes and Silly Stuff

Visit ANIMATED PROJECTIONS Powered by iCLONE

Intel Core i7 3960X @ 3300MHz Overclocked to 4999.7 MHz Sandy Bridge 24.0GB DDR3 @ 833MHz Graphic Display HP ZR30w 
GeForce GTX 980Ti 6GB  Microsoft Windows 7 Professional 64-bit SP1 ASUSTeK COMPUTER INC. P9X79 WS (LGA2011)