I installed iClone 7, Character Creator 2.1 and 3DXchange 7 Pipeline in that order on my system.

When I start 3DXchange 7 Pipeline I get the following error message:



Anyone have a solution to this?
I restarted the PC after each software install but somehow 3DXchange just isn't "seeing" iClone 7.



Gerry

---

System: Win 10 Pro (21H2), Asus X99-E WS, CPU i7-5930K -3,5 GHz, 32 GB DDR4 2666-16 RAM, NVidia GTX 1080 Ti GPU - 11 GB VRAM(Driver Studio-536.99), Samsung 850 Pro 512 GB SSD, 6 TB HD storage.

Additional information to the above post.

Both iClone 7 and CC 2.1 "see" that 3DXchange 7 Pipeline is installed as I can export fbx files from both. CC 2.1 also creates a .key file for the fbx.


Gerry

---

System: Win 10 Pro (21H2), Asus X99-E WS, CPU i7-5930K -3,5 GHz, 32 GB DDR4 2666-16 RAM, NVidia GTX 1080 Ti GPU - 11 GB VRAM(Driver Studio-536.99), Samsung 850 Pro 512 GB SSD, 6 TB HD storage.

Another return visit to this issue.

I can open skp, obj and fbx files in 3DXchange 7 Pipeline and export them without any problems in iClone 7, so I really don't know which functions-if any - have been disabled. 


Gerry

---

System: Win 10 Pro (21H2), Asus X99-E WS, CPU i7-5930K -3,5 GHz, 32 GB DDR4 2666-16 RAM, NVidia GTX 1080 Ti GPU - 11 GB VRAM(Driver Studio-536.99), Samsung 850 Pro 512 GB SSD, 6 TB HD storage.

See this post, where I responded to your comment in another thread: https://forum.reallusion.com/FindPost332303.aspx.

---

I found the answer in the Feedback Tracker issue 2353.

This is really something that should have been posted here in the Forum under "Known Issues" or "Important Installation Instructions", and not buried in the FT. 


Gerry

---

System: Win 10 Pro (21H2), Asus X99-E WS, CPU i7-5930K -3,5 GHz, 32 GB DDR4 2666-16 RAM, NVidia GTX 1080 Ti GPU - 11 GB VRAM(Driver Studio-536.99), Samsung 850 Pro 512 GB SSD, 6 TB HD storage.

I had the same problem, I uninstalled Iclone 7, then re installed, and that worked for me. Hope that helps.